Completed Kindle cover

Here's what it looks like with the elastic (and Kindle!) on the inside:

The elastic pieces are about 2.5" long, and they're placed about 1.5" from each edge. As soon as I sewed them on, my husband pointed out that the lower right elastic slightly blocks the power switch. Doh. Maybe about 1" from each edge (adjusting the length accordingly) would work better.

Christmas gifts: Getting back on the wagon

I know, it's been way too long! But I've been busy... growing a person :) That's right, we're expecting our third baby in July! First trimester fatigue has hit hard this time around, and so my prime sewing time (after the kids are in bed) has become my prime sleeping time. But I'm getting out of the first trimester now and getting a little more energy, so I'm ready to get back on the sewing wagon!

This past week, I worked on a couple of Christmas gifts for my husband. The first one was a no-sew fleece blanket:

I found the front panel on the red tag shelf at Joann's. The back is plain black fleece. These blankets are technically easy to make (and truly require no sewing), but they're somewhat time-consuming. You cut out a 4" x 4" piece from each corner, and then cut a 4" x 1" fringe all around the blanket. Then you tie a knot on each piece of fringe. That's the part that takes a while. My sewing room now doubles as my office (I guess it really should be the other way around, haha! :) so this was a perfect project to work on while I was stuck on conference calls!

Really, this panel would have worked better as a sewn blanket, if I had left on some of the fleece that originally bordered the design, as a seam allowance. See how the Longhorn logo in each corner gets kinda cut off in the no-sew version? I could have avoided that if I had sewn it. But I didn't realize that until after I had cut off the bordering fleece, and anyway, the Joann's lady cut the solid black fleece just big enough to match the panel, so I didn't really have any extra to work with on the back side. Oh well! It turned out fine anyway.

The second project was a cover for my husband's Kindle:

Since I don't use a Kindle myself, I started off by asking some of my friends who have one what they liked about their covers. There were two big features that most of them liked:

1. A pocket on the inside
2. A cover that opens like a book and allows for reading without removing the Kindle (as opposed to a pouch/slipcover style)

I did some searching and came up with a bunch of tutorials. I ended up finding inspiration in this tutorial: http://sewlostforyou.blogspot.com/2011/01/kindle-cover-tutorial.html

But it used leather, while I wanted to use Cowboys flannel (left over from making Hubby's pajama shorts for Fathers Day). Leather is a lot thicker/stiffer than flannel, and it doesn't fray, so I had to make quite a few modifications to make my flannel "behave" more like leather.

I started with the closure strap. I used two layers of flannel for this, and put some lightweight interfacing on the wrong side of one layer for stability. Then I sewed the two layers together, turned, and topstitched. Finally, I added a small strip of velcro to the strap. Here's what it looked like when completed:

As it turns out, it was way too long -- I'll get to that in a minute.

Then I did the inside pocket. For this one, I folded the flannel and cut an appropriately-sized piece, then added interfacing to the entire piece of flannel. So when I was done, I had two layers of flannel and two layers of interfacing. I cut it on a diagonal -- I totally eyeballed this, but it worked out well. If I were doing it again, I'd make the diagonal hit a little further down on the top edge of the piece of flannel. Anyway, you can see the rough dimensions here, about 7" x 4.5", minus that cutout.

I sewed along the top edge, the diagonal, and the non-folded edge (on the right in the picture above), leaving the bottom open for turning. I turned and topstitched around those three edges, leaving the bottom and the folded side un-topstitched.

Then I cut out the body pieces. I used the same dimensions as given in the tutorial mentioned above, but added half an inch to account for seam allowances, since I would be turning and topstitching. I think each piece ended up being 8.5" x 12". If I were doing it again, I'd add another half inch, and sew with a half inch seam allowance, just to give myself a little more room to work with.

I sewed the other strip of velcro to one body piece. This would become the outside cover.

I pinned the inside pocket to the other body piece, making sure to match up edges. This meant that the (still-open) bottom and the folded edge got sewn up when I sewed the body pieces together:

Finally, I put the two body pieces together, wrong sides facing, and sandwiched the strap between them. In this picture, the outside cover is on top (you can see where the velcro is sewed down, on the left side in the picture below). I helpfully noted that the strap has the velcro tab facing down, towards the inside cover:

I cut the strap way down! In the original tutorial, the strap goes all the way around the outside of the cover. Mine didn't have to go that far. I think it ended up being about 4.5 inches, with about an inch of that sticking out of the cover piece "sandwich," as you can see above.

Then I stitched the body pieces together, leaving a small opening for turning, at the top. Here's what it looked like after turning... outside:

And inside:

I stuck two pieces of Peltex in through the hole I'd left for turning. (So, that hole should be at least 5" wide or thereabouts. Peltex is SUPER heavy duty interfacing. I had some left over from my failed attempts to make the collar for Littles' Halloween costume, so I was glad to find another use for it. Here's what it looks like inside the cover:

You could also use headliner fabric if you wanted a softer/more padded case. But one thing I discovered in our big move is that I have a lot of fabric, haha. So my mission over the next few months is to sew out of my stash as much as possible!

OK, moving on. This wasn't in the directions for the original tutorial I was following, but I went ahead and fused the Peltex to the fabric, by putting a wet cloth on top of it and ironing.I figured that would keep it from shifting around.

Finally, I topstitched all around the cover body, which also closed up the hole for turning. And I sewed a couple of lines going down the "spine" of the cover.

Here's what it looked like when it was finished!

With something in the inside pocket, just to show it off, since it tends to get a little lost in the pattern.

I do have one more thing to completely finish this off. I need to sew four strips of elastic to secure the Kindle in the cover. (Inspired by this tutorial.) I couldn't find Hubby's Kindle when I was working on this, and didn't want to ruin the surprise, so I gave it to him as-is and plan to add those strips now that I can make sure to get them positioned just right.

Now... Hubby got a new Kindle Fire for Christmas! And it fits well inside this cover, too. But he has some suggestions for some minor modifications, e.g. making the strap longer so that he can "stand up" the Kindle Fire when watching movies on it. So, he'll use this one for his original Kindle (which he's keeping) and I'll probably sew another one of these soon. It seems like a lot of steps but it's really not too hard, and should be even easier now that I've figured out the modifications I need to make to that original tutorial.

Snow White costume

Yep, I'm still here.

I know I haven't posted in over a month. I've spent the last month 1) moving houses and 2) sewing Littles' Halloween costume. I think the first was more time consuming, but it's really a close call :)

Anyway, we're in the new house now, and good news! I now have a dedicated space for sewing :) (In the old house, my sewing area was in our guest room -- and we have guests frequently, so I had to take a sewing break or move my sewing stuff elsewhere on a regular basis. Not to mention the fact that guests had to find someplace to squeeze there stuff amidst all my fabric.) Bad news, I haven't had any time to set it up yet, so I'm still not sewing again. One of these days.

As for the Halloween costume, that did get finished, in time for the big day.

For those of you who aren't intimately familiar with the Disney Princesses (lucky!), this is Snow White. The pattern is Simplicity 2817, which is the official licensed one. I made a size 5 for Littles, who normally wears a 4T, and it fits fine with some room to grow.

The fabric is all Symphony broadcloth from Joann's. This is the cheapest kind of broadcloth that Joann's carries, and if I were to do this again, I think I'd use the next "step up." The Symphony stuff really does feel kinda thin and cheap. Because it is, I guess :)

Despite using the cheapie broadcloth, all the fabric cost about $20, which is about as much as a ready-to-wear Snow White dress! But this does include some nice extras, like the cape. (Which Littles has started wearing independently of the Snow White dress -- for example, she'll put it over her Silvermist costume and call herself "Super Silvermist!") Besides, those stupid store-bought dresses always start falling apart within days. Even with the cheapie broadcloth, this one is holding up much better.

Good thing, because as I implied earlier, I'm not 100% sure which was more time consuming, moving houses or sewing this costume :) That's a bit of an exaggeration, but really, this did take a while to sew. It wasn't particularly hard, there are just a lot of pieces to cut out and put together. Still, I think the end result was worth it.

I followed the pattern pretty closely, except:

• I used my serger on most seams, rather than my sewing machine. The pattern has a 5/8" seam allowance, so before sewing a seam, I'd draw a line 3/8" from the edge, and serge on that line. The serger adds another 1/4" seam allowance, so that's just right.
  There were only a few non-straight-line raw seams, mostly around the armholes. For those, I had to sew a basting line anyway to do the gathers, so I sewed the basting line at 3/8" in and then tried to serge along the basting line.
• I skipped the collar. I worked on it one night and couldn't figure it out, and I had way too much other stuff going on in my life to spend a ton of time messing with it.
• I used snaps, rather than velcro, to secure the cape to the dress (less likely to shift/come apart), and velcro, rather than a zipper, on the back opening (easier to get on/off independently).
• I goofed initially, and sewed the skirt onto the bodice the wrong way! So the seam was on the outside of the dress. Oops. I had to cut it off and re-serge it. In the process, I think the bodice lost a little of its "definition" -- if you look at a picture of Snow White, the bodice dips down further/more sharply at the front waistline. Also, at certain angles, the piping doesn't seem to match up quite right with the dip in the bodice. I might try to fix it up a bit, but it does look OK as-is, for the most part.

Here are a few more shots...

The headband has been a big hit as well. I don't love it -- I put glue all along the top of the headband to secure the fabric, and you can see the glue line even now that it's dried. I should have just put glue on the bottom of the headband. But anyway, I guess the important thing is that Littles loves it so much that she wants to wear it to school practically every day. And I have a few more of these headbands (I could only find a 3-pack of suitably sized headbands) and plenty more fabric to use to cover them, and these are super easy to make!

Another shot of the cape...

With Noob... I wanted to make him a Dopey costume to match, but simply ran out of time. And this might be the last year I could coerce him into wearing a costume to match his big sister's. Oh well.

So that's that! I'll see you again once my sewing room is set up :)

My new overnight solution!

It ain't much to look at, but it's working out great!

This is a Quick Snap Flap Wrap (QSFW), size medium. It's an incredibly simple and completely free pattern that sews up very quickly if you have a serger. (It can also be turned and topstitched if you don't.) It took me maybe an hour, and that included cutting out and taping together the pattern, figuring out what went where, etc.

Anyway. What I liked about this pattern, besides the price, is that it doesn't require elastic at all. This meant that I could make it entirely out of Zorb II, which is the only diapering material I've found that doesn't give me ammonia stink issues overnight. As I mentioned in a previous post, I've had problems getting elastic to gather Zorb II properly... but if there's no elastic, then there's no problem!

The main body of the diaper is a single layer of Zorb II, which results in three layers in the wetzone when it's folded. Then I added a single-layer Zorb II snap-in soaker, for extra absorbency:

The result is incredibly trim for an overnight diaper! Normally those things are practically bigger than the baby :)

The one thing about the lack of elastic is that it does allow the diaper to gape at the legs:

 

This isn't a big deal because these are for overnights, and Noob rarely poops overnight. Of course, he's decided to do it not once but twice in this particular diaper, while wearing it overnight! (I swear, he has a thing for pooping in brand-new diapers.) The first time, the diaper contained it entirely, and the second time, it only leaked slightly onto the cover, not onto his pajamas. Not a big deal!

Here's the QSFW with a wool soaker over it -- you can see how much snugger it is around the legs:

And just because I didn't have an action shot of that super cute Cowboys fleece soaker I made a while back... here's one of it over the QSFW:

This combination has held up great all night long! The diaper often has dry spots in the morning, so I think this is plenty of absorbency for Noob. If it weren't, I could easily add some more layers to that snap-in soaker.

I made one more slightly fancier version:

This one still has an inner of Zorb II and a single-layer Zorb II doubler, but the outer is "minky" (Soft n Comfy fabric from Joann's). Due to the way the QSFW is folded, the outer fabric actually touches Noob's bottom:

That's why I chose minky: It's super soft and stay-dry against his bottom, but still looks cute as an outer, too!

Definitely not the cutest overnight solution, but very functional!

Halloween is right around the corner...

...which means I've been busy sewing! I'm working on Littles' Halloween costume, which is taking forevvvvvvver. So I've been taking breaks here and there to sew up some of the Halloween "Ooga Booga" fabric I got a while back.

Fitted:

Pattern: Sprout Snap (one size)
Outer: Cotton interlock (KAM Snaps)
Hidden layer: Bamboo fleece (purchased through a coop)
Inner: Bamboo velour (Nature's Fabrics)
Soaker: snake style, 3 layers bamboo fleece, one layer bamboo velour. Intended to be folded in two to fit whatever rise setting the shell is on.

This diaper turned out pretty small. Noob is still mostly in mediums, and on the medium rise setting in his one-size diapers, but he's on the large rise setting in this diaper and looks like he might outgrow it soon! So I would say this is a pretty small one-size. This pattern has a unique feature where you can snap the rise snaps into the waist snaps to create a "newborn" setting. It's teeny tiny!

Action shot... Noob was not pleased to be my model :) He's not a fan of wearing diapers these days, at least not around the house.

All-in-two (AI2):

Pattern: Sprout Snap (one size)
Outer: Cotton interlock
Hidden layer: PUL (fabric.com)
Inner: Microfleece (wazoodle.com)
Soaker: Snake style, three layers bamboo fleece, one layer microfleece

I wanted to try out an all-in-two style with a cotton outer layer. Supposedly, using a fabric like microfleece on the inner prevents moisture from getting through to the cotton outer, where it would wick. Unfortunately, the two times that Noob has worn this diaper, he has pooped within minutes of putting it on. So I haven't been able to see how it holds up to lots of moisture.

Action shots... sorry, the lighting wasn't the greatest on some of these:

I'm not sure I love this pattern. It seems a little baggy in the butt for Noob, and just fits oddly throughout. Hmmm.

Have I not posted about these diapers yet?

We're on vacation, so I'm not sewing this week. I am, however, putting up tons of vacation pictures on my personal blog. And I noticed that my "Sewing" folder had some pictures that I don't think I've put up here yet.

So, here are some more diapers. Apologies if any of these are a repeat!

Pattern: Darling Diapers Unlimited, size medium
Outer: T-rex polyester knit print, from the Top Shelf Fabrics destash
Hidden layer: PUL
Inner: Alova suedecloth from Joann's, modified welt pocket
Closure: Snaps. I was running low on black snaps, so I did sockets on the wings and studs on the body -- usually, you do the opposite. But it works fine this way, too!

Front:

Back:

Inside:

I made this diaper mostly to see whether doing a poly print outer/hidden PUL layer would work OK, without any Chelory Method type stuff. And... it does!

One other thing I learned with this diaper is that when sewing with a hidden PUL layer, it's good to use microfleece for the inner. This diaper is kinda hard to stuff, and I think it's because the outer is a tiny bit thicker and less stretchy (with the two layers of fabric), and then the suedecloth doesn't stretch at all. My Cowboys diaper is also a tiny bit harder to stuff than my other diapers, but it's easier than this one, and I think that's because the microfleece inner helps a lot.

The other thing that doesn't help with the stuffing issue is that with suedecloth, I like to turn the edges of the modified welt pocket opening under slightly. (Microfleece is a little too thick to do that with.) That cuts down slightly on the total width of the pocket opening. After doing this diaper, I started adding an extra inch to the pocket opening when doing a suedecloth inner, and that does help a lot with stuffability.

Anyway, once I get this diaper stuffed and onto Noob, I love it. So cute!

Next up... pattern: Darling Diapers Unlimited, size medium
Outer: Winter Giraffes printed PUL, purchased directly from another sewer
Inner: Periwinkle microfleece from Wazoodle. I'm curious to see how this holds up. The white microfleece I've been using (from the Swaddlebees Clearance section) gets pilly and dirty, fairly quickly.
Closure: Tabs are aplix hook. Front strip and laundry tabs are touchtape loop. Both from Wazoodle. I love this combination! I've always found aplix to be not quite sticky enough, and touchtape to be too sticky, so I like using hook of one and loop of another.

I used DiaperMaker elastic from Wazoodle for the first time on this diaper. (I normally use regular ol' Dritz elastic, which I buy in bulk by the yard at Joann's.) I didn't like it at first. It didn't seem to be very strong. In these pictures, taken right after I sewed the diaper, the rise on the diaper seemed to be much higher than usual, as if the elastic wasn't strong enough to gather the diaper enough.

But I think the elastic shrunk slightly when I washed it, and now, it fits just like my other diapers that use this pattern. I'm actually starting to prefer the softer touch of this elastic. It seems less harsh/less likely to cause red marks on Noob's thighs. I haven't sewed any new diapers for Noob in a few weeks, but I do plan to try this elastic again when I do.

Finally, probably the ugliest diaper I've ever sewn :)

Pattern: Very Baby Basic AIO, size medium/long
Outer: woven cotton print (Joann's remnants bin)
Hidden layer: Zorb II (Wazoodle)
Inner: minky (Soft n Comfy fabric from Joann's remnants bin)
Soaker: trifold with one layer minky/one layer Zorb II

I actually started this as a Fourth of July diaper. I was putting the finishing touches on the soaker when I ran out of thread on my serger. Now, this was right after I got the serger... and it took me until well after the Fourth of July to figure out how to re-thread it :) Haha! In my defense, the serger does have four separate threads that need to be threaded, and one of them has eleven steps to thread it! The serger I have does make it as easy as possible, but it's still not easy, especially the first time.

Anyway, I eventually figured it out and finished the diaper. (And now threading my serger really is easy!) But, it turns out that Zorb II doesn't work well as a hidden layer for a fitted. It is really thick, making the diaper bulky, and also, the elastic isn't strong enough to gather it well. So, this diaper is huge, and the inner minky rolls out at the legs and looks funny.

That said... I actually love this diaper. The Zorb II might make the diaper ugly, but it also makes it super absorbent. I use it regularly overnight, and it still has dry spots in the morning. Also, I've always had recurring ammonia issues in overnight diapers... not this one. Zorb II seems to be much less prone to stink. I usually alternate overnights between this diaper and the camo Rainy Days diaper, so they get used equally often -- well, I've already had to strip the camo diaper because it was getting ammonia-stinky. This diaper has never even had a hint of stink.

So, now I'm trying to figure out a way to make an overnight-worthy fitted exclusively out of Zorb II, since clearly, elastic doesn't work too well with it.. I have some ideas. Stay tuned :)